Call for Paper

CAE solicits original research papers for the November 2021 Edition. Last date of manuscript submission is October 30, 2021.

Read More

Design and Construction of a Torch powered by Shaking

Patrick Fiati. Published in Power Systems.

Communications on Applied Electronics
Year of Publication: 2016
Publisher: Foundation of Computer Science (FCS), NY, USA
Authors: Patrick Fiati
10.5120/cae2016652182

Patrick Fiati. Design and Construction of a Torch powered by Shaking. Communications on Applied Electronics 5(1):1-5, May 2016. BibTeX

@article{10.5120/cae2016652182,
	author = {Patrick Fiati},
	title = {Design and Construction of a Torch powered by Shaking},
	journal = {Communications on Applied Electronics},
	issue_date = {May 2016},
	volume = {5},
	number = {1},
	month = {May},
	year = {2016},
	issn = {2394-4714},
	pages = {1-5},
	numpages = {5},
	url = {http://www.caeaccess.org/archives/volume5/number1/584-2016652182},
	doi = {10.5120/cae2016652182},
	publisher = {Foundation of Computer Science (FCS), NY, USA},
	address = {New York, USA}
}

Abstract

The main aim of this project is to design and construct a touch powered by shaking. A renewable energy flashlight comprises a housing and a barrel located within the housing. A wire coils wraps around the barrel, between the barrel and the housing. A magnet oscillates within the barrel when the touch light is shaken, generating an alternating current in the coil. Two spring at either end of the barrel causes the magnet to recoil when the magnet strikes the springs. An electronics assembly within the housing includes a capacitor for storing charge, a rectifier connected to the capacitor, and means for conducting current flowing in the coil to the rectifier, to charge the capacitor. A LED is connected to the capacitor by means of a switch, and lights up when the switch is turned on. This torch will be mostly needed in the rural area where there is scarcity of Electricity and because its cheap for them to purchase.

References

  1. Cutnell Johnson, KennethW. Johnson (1987). Physics Forth edition, Q23. Cut. Pp 45,100
  2. Hughes & McKenzie Smith (1995). Electrical Technology, Electrical Materials. Pp. 137
  3. Paul Horowitz & Winifred Hill (1980, 1989). The Art of electronics, Cambridge University Press. UG / TK 7815 HOR. Pp 45,361.

Keywords

Flashlight, Permanent magnet, Coil, LED, Capacitor