Call for Paper

CAE solicits original research papers for the April 2023 Edition. Last date of manuscript submission is March 31, 2023.

Read More

New Proposal of A Hybrid Voltage and Frequency Monitoring System

Amritayan Chatterjee, Dependra Nath Shome, Ramit Kishore Saha, Sourajit Mukhopadhyay Published in Power Electronics

CAE Proceedings on International Conference on Computing, Communication and Sensor Network
Year of Publication: 2016
© 2015 by CAE Journal

Amritayan Chatterjee, Dependra Nath Shome, Ramit Kishore Saha and Sourajit Mukhopadhyay. Article: New Proposal of A Hybrid Voltage and Frequency Monitoring System. CAE Proceedings on International Conference on Computing, Communication and Sensor Network CCSN 2015(1):12-16, March 2016. Published by Foundation of Computer Science, New York, USA. BibTeX

@article{key:article,
	author = {Amritayan Chatterjee and Dependra Nath Shome and Ramit Kishore Saha and Sourajit Mukhopadhyay},
	title = {Article: New Proposal of A Hybrid Voltage and Frequency Monitoring System},
	journal = {CAE Proceedings on International Conference on Computing, Communication and Sensor Network},
	year = {2016},
	volume = {CCSN 2015},
	number = {1},
	pages = {12-16},
	month = {March},
	note = {Published by Foundation of Computer Science, New York, USA}
}

Abstract

The purpose of this project is to design a hybrid voltage and frequency monitoring device which can act as a controlled power source. The whole system which is controlled and monitored by the ATC89c51 microcontroller, provides a perfect monitoring of line voltage and frequency and alerts the user for critical voltage and frequency limits and switches off the electromagnetic relay that act as a Circuit Breaker to switch off the main electrical supply to protect the electrical circuitry. The Relay gets activated whenever the electrical parameters are within the limited predefined acceptable ranges. All the circuit breakers like MCB etc. available in market cuts the power only in the exceeding voltage ranges but this system can cut the power when frequency is exceeded from ±10% of the normal supply frequency (50Hz, AC) as well as upper and lower cutoff voltages 250V and 160V respectively. Thus better protection of electrical circuitry is possible by this system.

References

  1. http://www. electronics-tutorials. ws/filter/filter_7. html.
  2. Robert L. Boylestad, Louis Nashelsky, Electronic Devices and Circuit Theory, Pearson India, Tenth Edition,2009.
  3. Jacob Millman, Christos Halkias, Chetan D Parikh, Millmans's Integrated Electronics, Tata McGraw Hill Education India pvt. Ltd, Second edition. 2011.
  4. Md. Imran Hossain Jony, Md. Moshiur Rahman, "Construction of microcontroller based digital voltmeter", International Journal of Science & Research,Vol. 3, Issue 1,(Jan 2014).
  5. D. Ibrahim, "Accurate measurement of the mains frequency", IJTPE Journal,Vol. 3,Issue 9,No. 4,102-105(2011).
  6. Muhammad Ali Majidi and Janice Gillispie Mazidi, The 8051 microcontroller And Embedded Systems Using Assembly & C, Pearson India, Second Editoin,2007.
  7. B. L. Theraja, A. K. Theraja, A Textbook of Electrical Technology in SI Units, Volume 1: Basic Electrical Engineering, S Chand & Co Ltd; 1st edition (July 31, 1999).
  8. Amit Sachan , "Microcontroller based substation monitoring and control system with GSM modem", IOSR Journal of Electrical and Electronics Engineering, Vol. 1, Issue 6, PP 13-21, (July-Aug. 2012).
  9. M. A. A. Mashud, M. A. A. Tariq, M. Shamim Hossain, Md. Serajul Islam, "Design and development of a low-cost microcontroller based single phase water-pump controller", International Journal of Information Sciences and Techniques (IJIST) Vol. 2, No. 4, July 2012.

Keywords

Line voltage & frequency, Microcontroller, Circuit breaker, Monitor, Band pass filter.